Products Category

RF Coaxial Connector
- N
- 4.3-10
- MQ4/MQ5
- 7/16(L29)
- Adaptor
- BNC
- TNC
- MCX
- CC4(1.0-2.3)
- EIA(IF45-70-110)
- Mini Din(4.1-9.5)
- MMCX
- QMA
- SMA
- SMB
- SMZ
- SSMB
- UHF
Jumper Cable
- 1/2” SCF
- 1-2'' LCF
- 1-4'' SCF
- 3-8'' SCF
- LMR Series
- RG Series
Surge Arrestor
- Gas Tube
Communication Accessories
High Frequency Connectors

1/2" Superflex Jumper, 4.3/10 Male Straight to 4.3/10 Male Straight

Model:4.3/10-H-J1/2S-5/4.3/10-H-J1/2S-5-L(m)

Consultation

Technical Indicators Packing

SPECIFICATION
1/2" Superflex Jumper, 4.3/10 Male Straight to 4.3/10 Male Straight









Interface
According to		IEC 61169-54
Electrical
Characteristic Impedance		50 ohm
Freqency Range		DC-3.8GHz
VSWR		≤1.18
PIM (@2-tonex20w)		≤-160dBc
Dielectric Withstanding Voltage		≥2500V RMS,50Hz,at sea level
Dielectric Resistance		≥5000MΩ
Contact Resistance		Center Contact ≤1.0mΩ
		Outer Contact ≤1.0mΩ
Mechanical
Durability	Mating cycles ≥100 cycles
Material and plating
	Material		Plating
Body	Brass		Tri-alloy
Insulator	PTFE		-
Center conductor	Brass		Ag
Others	Brass		Ni
Environmental
RoHS-compliance		Full RoHS compliance
Temperature Range		-40℃～+85℃
Watertightness		IP68
Salt-fog test		96h

All products appearance, technical performance and electroplating can be customized according to customer requirements.

RF-Combination connectors of different connector series can be assembled as either straight or angle versions by using the corresponding clamps. With only one combination connector and the different cable clamps, a variety of connectors can be produced allowing a reduction in stock-levels. The technical specifications can be obtained from the descriptions in the respective chapters for each series.
For example: for ½” or ½”superflex jumper cable, DIN male straight(right angle)
on both sides, VSWR can reach less than 1.10@(0-3)GHz,
1.20@(0-6)GHz PIM less than -160dBc@(2-tone × 20W).

The packing pictures are only for reference, all packing can be customized by different requirements