Cold Shrink Tube 4.3/10 Connector 1/4s Cable Or Larger 7.0-24.3mm

Model:Cold Shrink Tube 4.3/10 Connector 1/4s Cable Or Larger 7.0-24.3mm

Cold shrink tube are supplied for field installation in this pre-stretched condition. 
The core is removed after the tube has been positioned for installation over an in line connection, terminal lug, etc., allowing the tube to shrink and form a waterproof seal. The insulating tube is made of EPDM rubber, which contains no chlorides or sulphurs. Various diameter sizes will cover a range of 1000 volt cables, copper and aluminum conductors

Test item

Test Standard

Unit

Value

Dielectric Strength

Dielectric Strength

kV/m

21

volume resistivity

ASTM D257

Ohm.cm

3.4×1015

Shore Hardness

Shore Hardness

Shore A

44

Tear Strength

ASTM D624C-73

kN/m

30

Tensile strength

ASTM D412-75

Mpa

9.0

Elongation at Break

ASTM D412-75

%

750

bacteria resistance

bacteria resistance

----

No bacteria

Working temperature

 

-60 to 200

All products appearance, technical performance and electroplating can be customized according to customer requirements.

Passive components,such as dummy load,attenuator,splitter and coupler,are widely-used 
in telecom infrastructure and projects,both indoors and outdoors.
With high-performance and excellent design,the components amde by ZK have grown to be another pillar industry in telecom field.
Indoor network solutions combine all these passive components to unify inner system and 
bring convenience and briefness in installation and actual application. 

The packing pictures are only for reference, all packing can be customized by different requirements
×

Contact Us

captcha