Products Category

RF Coaxial Connector
- N
- 4.3-10
- MQ4/MQ5
- 7/16(L29)
- Adaptor
- BNC
- TNC
- MCX
- CC4(1.0-2.3)
- EIA(IF45-70-110)
- Mini Din(4.1-9.5)
- MMCX
- QMA
- SMA
- SMB
- SMZ
- SSMB
- UHF
Jumper Cable
- 1/2” SCF
- 1-2'' LCF
- 1-4'' SCF
- 3-8'' SCF
- LMR Series
- RG Series
Surge Arrestor
- Gas Tube
Communication Accessories
High Frequency Connectors

4.3/10 MALE CONNECTOR FOR 1/2"FEEDER CABLE

Model:4.3/10-J1/2

4.3-10 connector system is designed to meet the rising performance needs of mobile network equipment e.g. to connect the RRU to the antenna. The small size and low weight of these connectors do justice to the miniaturization of mobile radio network components. Despite their size, the connectors guarantee excellent return loss and passive inter-modulation performance (PIM) levels

Three different coupling mechanisms of the plug connectors screw, quick-lock/push-pull and hand-screw types are mateable with all jack connectors. All of the 4.3-10 connectors meet the requirements of IP68 and, because of the excellent properties of materials used, are suitable for temperatures ranging from -40°C up to +85°C. Customized connector designs for use at higher temperatures are also possible on demand

Consultation

Technical Indicators Packing

SPECIFICATION
4.3/10 MALE CONNECTOR FOR 1/2"FEEDER CABLE

Part Number: 4.3/10-J1/2 Dimensions are in millimeters
Interface
According to		IEC 61169-54
Electrical
Characteristic Impedance		50 ohm
Frequency Range		DC-12GHz
VSWR		≤1.1(0-3G)
PIM Intermodution@2-tonex20w		≤-160 dBc
Dielectric Withstanding Voltage		≥2500V RMS,50Hz,at sea level
Dielectric Resistance		≥5000MΩ
Contact Resistance		Center Contact ≤1.0mΩ
		Outer Contact ≤1.0mΩ
Mechanical
Durability		Mating cycles ≥100 cycles
Material and Plating
	Material		Plating
Body Center conductor Insulator Gasket Other	Brass Brass PTFE Silicone rubber Brass		Tri-Alloy Ag - - Ni
Environmental
Temperature Range		-40℃～+85℃
Watertightness		IP67
RoHS-compliance		Full RoHS Compliance
Salt-fog test		96h

All products appearance, technical performance and electroplating can be customized according to customer requirements.

RF means Radio Frequency.

RF is generally defined at 300MHz to 8GHz, while microwave is defined at 8G to 40G.

The ministry of industry and information technology has released the frequency use plan of 5G system within the frequency band of 3000-5000MHz, making China the first country in the world to release the frequency use plan of 5G system within the frequency band.

In the 5G era, the number of channels has become more and more integrated, and 5G RF connectors are mainly board-to-board blind plug connectors.

The packing pictures are only for reference, all packing can be customized by different requirements