Products Category

RF Coaxial Connector
- N
- 4.3-10
- MQ4/MQ5
- 7/16(L29)
- Adaptor
- BNC
- TNC
- MCX
- CC4(1.0-2.3)
- EIA(IF45-70-110)
- Mini Din(4.1-9.5)
- MMCX
- QMA
- SMA
- SMB
- SMZ
- SSMB
- UHF
Jumper Cable
- 1/2” SCF
- 1-2'' LCF
- 1-4'' SCF
- 3-8'' SCF
- LMR Series
- RG Series
Surge Arrestor
- Gas Tube
Communication Accessories
High Frequency Connectors

IF45 male connector for 1-2”feeder cable

IF45 male connector for 1-2”feeder cable

IF45-J1/2
EIA RF Connectors are used to connect two items of high power radio frequency rigid or semi-rigid (flexline) coaxial transmission line. Typically these are only required in very high power transmitting installations (10s of kW to MW) where the feedline diameters may be several inches.

Consultation

Technical Indicators Packing

SPECIFICATION
IF45 male connector for 1-2”feeder cable

Part Number: IF45-J1/2 Dimensions are in millimeters
Interface
According to		IEC 339
Electrical
Characteristic Impedance		50 ohm
Frequency Range		DC-1GHz
VSWR		≤1.15
Dielectric Withstanding Voltage		≥4000V RMS,50Hz,at sea level
Dielectric Resistance		≥10000MΩ
Mechanical
Durability		Mating cycles ≥500 cycles
Material and Plating
	Material		Plating
Body Center conductor Insulator Gasket Other	Brass Brass/Phosphor Bronze SFX-1-1/ABS Silicone rubber Brass		Tri-alloy Ag - - Ni
Environmental
Temperature Range		-40℃～+85℃
Watertightness		IP67
RoHS-compliance		Full RoHS Compliance
Salt-fog test		96h

RF means Radio Frequency.
RF is generally defined at 300MHz to 8GHz, while microwave is defined at 8G to 40G.
The ministry of industry and information technology has released the frequency use plan of 5G system within the frequency band of 3000-5000MHz, making China the first country in the world to release the frequency use plan of 5G system within the frequency band.
In the 5G era, the number of channels has become more and more integrated, and 5G RF connectors are mainly board-to-board blind plug connectors.

The packing pictures are only for reference, all packing can be customized by different requirements