Products Category

RF Coaxial Connector
- N
- 4.3-10
- MQ4/MQ5
- 7/16(L29)
- Adaptor
- BNC
- TNC
- MCX
- CC4(1.0-2.3)
- EIA(IF45-70-110)
- Mini Din(4.1-9.5)
- MMCX
- QMA
- SMA
- SMB
- SMZ
- SSMB
- UHF
Jumper Cable
- 1/2” SCF
- 1-2'' LCF
- 1-4'' SCF
- 3-8'' SCF
- LMR Series
- RG Series
Surge Arrestor
- Gas Tube
Communication Accessories
High Frequency Connectors

1/2 feeder Jumper, 4.3-10 Male To 4.3-10 Female, (L)m

1/2 feeder Jumper, 4.3-10 Male To 4.3-10 Female, (L)m

4.3-10-H-J1-2-4.3-10-H-K1-2-(L)M

Consultation

Technical Indicators Packing

SPECIFICATION
1/2 feeder Jumper, 4.3-10 Male To 4.3-10 Female, (L)m

P/N：4.3-10-H-J1-2-4.3-10-H-K1-2-(L)M Dimensions are in millimeters
Interface
According to			IEC 60169-54
Electrical
Characteristic Impedance			50 ohm
Frequency Range			0-4GHz
VSWR			≤1.18
PIM ( @2-tonex20w)			≤-160dBc
Dielectric Resistance			≥5000MΩ
Mechanical
Durability			Mating cycles ≥100 cycles
Material and plating
	Material			Plating
Body	Brass			Tri-Alloy
Insulator	PTFE			-
Center conductor	Brass			Ag
Environmental
Temperature Range		-40℃～+85℃
Water tightness		IP68
RoHS-compliance		Full RoHS compliance
Salt-fog test		96h

RF-Combination connectors of different connector series can be assembled as either straight or angle versions by using the corresponding clamps. With only one combination connector and the different cable clamps, a variety of connectors can be produced allowing a reduction in stock-levels. The technical specifications can be obtained from the descriptions in the respective chapters for each series.
For example: for ½” or ½”superflex jumper cable, DIN male straight(right angle)
on both sides, VSWR can reach less than 1.10@(0-3)GHz,
1.20@(0-6)GHz PIM less than -160dBc@(2-tone × 20W).

The packing pictures are only for reference, all packing can be customized by different requirements